Cleaning agent JY-5020L

One-time solution to the product rust cleaning problem!

Product Introduction:

Water-based anti-rust cleaning agent JY-5020L is independently developed by our company, using the latest water-based raw materials to make environmentally friendly products, do not contain nitrite and other carcinogens, widely used in a variety of metals, steel, castings, alloy steel, ductile iron, auto parts and other easy to rust materials. Its environmental protection, odorless, non-volatile, less residue, safety and other properties are the best choice for replacing anti-rust oil.

Precision metal parts such as bearings have good degreasing and rust prevention performance, to prevent corrosion and rust in the cleaning process, is the best product to replace the previous use of aviation kerosene, safer and more economical.

How to use:

Anti-rust cleaning "anti-rust cleaning" drying

Scope of application:

Water-based anti-rust cleaning agent JY-5020L is widely used in steel parts, metal workpieces, castings, forgings, cylinder liner, crankshaft, bearing, pump machinery manufacturing and maintenance of ferrous metal, auto and motorcycle parts and other industries between the process of rust prevention, semi-finished rust prevention and finished rust prevention.

Our water-based anti-rust agent is also called water-based anti-rust agent, the product can effectively remove all kinds of pollutants produced in the metal processing process (cutting oil, stamping oil and oil used in heat treatment, etc.), and is not corrosive to metal, with good oil resistance performance can quickly disperse polluting substances, Use a small amount of environmentally friendly water-soluble degreasing anti-rust cleaning agent that can also reflect the good cleaning effect.

First, product principle

Water-based anti-rust cleaning agent JY-5020L has high performance anti-rust cleaning performance, relying on the anti-rust function of the surfactant molecules quickly combined with metal molecules to form protection, to avoid direct contact between metal and air oxidation reaction, so as to achieve the purpose of long-term anti-rust. There is no need to clean the product before entering the next process after treatment, which has no impact on the product size and surface finish, and does not affect the subsequent welding, paste and other properties.

Second, product characteristics

The rust prevention period is different due to the difference in environmental temperature, humidity and corrosive ingredients, usually up to 90 days, and cast iron carbon steel is easy to rust for 30 days.

3. Scope of application

1. Used for metal and cast iron and steel parts easy to rust metal workpiece cleaning + oil-free short-term rust prevention (process rust prevention), suitable for industrial production enterprises of various machinery, equipment in the repair process of black metal materials, parts of the short and medium rust treatment.

2. Used for electroplating, phosphating workpiece cleaning and passivation anti-rust treatment, can greatly improve the corrosion resistance of electroplating and phosphating film.

Fourth, product advantages

1. Suitable for removing all kinds of iron and non-iron metal products cutting oil and various pollutants after heat treatment.

2. It can be cleaned by spraying or ultrasonic equipment.

3. It has good anti-rust performance, which not only prevents the product from rusting during the process, but also has good anti-corrosion effect on the cleaning machine and other related equipment.

4. It is a water-soluble product, which is weakly alkaline, has no effect on the skin, is environmentally friendly and cheap.

5. Good oil resistance can quickly disperse polluting substances, so it can also maintain the freshness of the liquid used.

5. Preparation and use conditions of cleaning anti-rust working fluid

Ratio (dilution weight ratio of raw liquid to water) : 5-8% concentration

That is: 1 part of this product: 15-20 parts of water (depending on cleaning and rust prevention requirements)

Rust prevention period: 2-3 months

Temperature: normal temperature -50℃ (generally normal temperature can be used, in order to make the workpiece dry quickly after rust, rust liquid can be heated to 40-50℃)

Soaking time: 2-3 minutes

High pressure spray, low foam type: 5-8% concentration, that is: 1 part of this product: 15-20 parts of water (depending on cleaning and rust prevention requirements)

Also suitable for ultrasonic, manual cleaning. (Environmentally friendly and non-toxic)

Six, precautions

1. Under normal circumstances, the workpiece immersed in the working liquid for 2 to 3 minutes can achieve satisfactory anti-rust cleaning effect, if the use of spray (brush) coating method to deal with large and complex workpiece, should ensure that the liquid fully wet all corners of the workpiece, uneven treatment will seriously affect the anti-rust effect.

2. Before anti-rust cleaning treatment, it is necessary to ensure that the surface of the workpiece is free of oil pollutants and rust, no granular attachments, and the higher the surface finish, the better the anti-rust effect. Do not bring acidic water into the anti-rust liquid, otherwise the anti-rust liquid will fail, and the anti-rust effect is poor. The workpiece after rust removal with acid should be rinsed at least two times with flowing water to ensure that the surface of the workpiece is neutral.

3. Under normal circumstances, the concentration of anti-rust cleaning liquid will not be reduced, but the amount should be reduced, and the stock liquid and water should be added proportionally. When the rust inhibitor is brought into the tap water or cleaning agent residue, the pollution can not effectively prevent rust, it needs to be re-slotted. It is recommended that the slot opening time be the same as that of the cleaning agent.

4. After the workpiece is treated with anti-rust cleaning solution, it is best to use a spray gun with compressed air to blow off the residual water on the surface and each dead corner, and then dry, the conditions are best to dry, and the dried workpiece should be placed in a dry packing box, or wood as the basis of the ground.

5. Before preparing the working liquid, shake the bucket several times before pouring out the original liquid.

Vii. Packaging and storage

25kg/50KG drum, sealed storage in a cool and ventilated warehouse, shelf life of two years.

8. Customer groups

The company's direct or indirect customers are: Aviation China, BYD, Jinlong passenger car, Bosch, Valeo, Dongfeng Motor and other dozens of well-known enterprises.

Water-based anti-rust cleaning agent JY-5020L for steel parts, metal workpiece, castings, forgings, cylinder liner, crankshaft, bearing, pump machinery manufacturing and maintenance of ferrous metal, auto and motorcycle parts and other industries between the process of rust prevention, semi-finished product rust prevention and finished product rust prevention.

1. Used for metal and cast iron and steel parts easy to rust metal workpiece cleaning + oil-free short-term rust prevention (process rust prevention), suitable for industrial production enterprises of various machinery, equipment in the repair process of black metal materials, parts of the short and medium rust treatment.

2. Used for electroplating, phosphating workpiece cleaning and passivation anti-rust treatment, can greatly improve the corrosion resistance of electroplating and phosphating film.

1. Suitable for removing all kinds of iron and non-iron metal products cutting oil and various pollutants after heat treatment.

2. It can be cleaned by spraying or ultrasonic equipment.

3. It has good anti-rust performance, which not only prevents the product from rusting during the process, but also has good anti-corrosion effect on the cleaning machine and other related equipment.

4. It is a water-soluble product, which is weakly alkaline, has no effect on the skin, is environmentally friendly and cheap.

5. Good oil resistance can quickly disperse polluting substances, so it can also maintain the freshness of the liquid used.

Note: The rust prevention period is different due to the difference in environmental temperature, humidity, corrosive ingredients, usually up to 90 days, cast iron and carbon steel rust-prone materials 30 days.

Ratio (dilution weight ratio of raw liquid to water) : 5-8% concentration

That is: 1 part of this product: 15-20 parts of water (depending on cleaning and rust prevention requirements)

Rust prevention period: 2-3 months

Temperature: normal temperature -50℃ (generally normal temperature can be used, in order to make the workpiece dry quickly after rust, rust liquid can be heated to 40-50℃)

Soaking time: 2-3 minutes

High pressure spray, low foam type: 5-8% concentration, that is: 1 part of this product: 15-20 parts of water (depending on cleaning and rust prevention requirements)

Also suitable for ultrasonic, manual cleaning. (Environmentally friendly and non-toxic)

Operation process: anti-rust cleaning "anti-rust cleaning" drying

1. Under normal circumstances, the workpiece immersed in the working liquid for 2 to 3 minutes can achieve satisfactory anti-rust cleaning effect, if the use of spray (brush) coating method to deal with large and complex workpiece, should ensure that the liquid fully wet all corners of the workpiece, uneven treatment will seriously affect the anti-rust effect.

2. Before anti-rust cleaning treatment, it is necessary to ensure that the surface of the workpiece is free of oil pollutants and rust, no granular attachments, and the higher the surface finish, the better the anti-rust effect. Do not bring acidic water into the anti-rust liquid, otherwise the anti-rust liquid will fail, and the anti-rust effect is poor. The workpiece after rust removal with acid should be rinsed at least two times with flowing water to ensure that the surface of the workpiece is neutral.

3. Under normal circumstances, the concentration of anti-rust cleaning liquid will not be reduced, but the amount should be reduced, and the stock liquid and water should be added proportionally. When the rust inhibitor is brought into the tap water or cleaning agent residue, the pollution can not effectively prevent rust, it needs to be re-slotted. It is recommended that the slot opening time be the same as that of the cleaning agent.

4. After the workpiece is treated with anti-rust cleaning solution, it is best to use a spray gun with compressed air to blow off the residual water on the surface and each dead corner, and then dry, the conditions are best to dry, and the dried workpiece should be placed in a dry packing box, or wood as the basis of the ground.

5. Before preparing the working liquid, shake the bucket several times before pouring out the original liquid.