"With the booming development of the construction industry, the use of steel reinforcement is becoming more frequent, but the consequent corrosion problem is also becoming more serious. As a kind of efficient rust removal method, the application method and effect of steel bar rust remover have been widely concerned. This article will introduce in detail the use method and process of steel bar rust remover, and how to effectively prevent the recurrence of rust.

First, the importance of steel rust remover

Rust remover can not only remove the rust on the surface of steel and steel bars, but also keep the state of the unrusted part intact, which is the mainstream rust removal method on the market at present. Especially in bad weather conditions, such as heavy rain, the problem of rust on the surface of the steel bar is particularly prominent, so it is particularly important to understand the use of steel bar rust remover.

Second, the use of steel rust remover and process

Wear safety equipment: Before rust removal operation, wear rubber gloves and masks, and do basic protection to avoid splashing or spraying on the body.

Remove dirt: The surface of the corroded steel bar is rough and easy to harbor dirt. Before rust removal, if the surface of the dirt is serious, it is recommended to clean with a brush and a rag to ensure that the rust remover can fully contact the surface of the steel bar.

Rust removal operation: According to the site conditions and the severity of rust, the choice of sprayer spray method, solution soaking method or dipping and brushing method to remove rust. These methods are in order for the rust remover to react adequately with the rust component ferric oxide.

Rinse and dry: After rust removal, use clean water to fully rinse, so as to bring the loosened rust and oxide layer, to achieve the effect of brightening, and then wait for the steel bar to be completely dry, do not touch the surface with your hand during the process, and do not let the surface touch water.

Rust prevention: This is an overlooked step. Unless concrete is poured after steel bar rust cleaning, rust prevention treatment (rust prevention agent) should be done, this step is essential to extend the long-term storage of steel bars.

Third, how to effectively prevent steel corrosion

As a focus of the metal surface treatment industry, Kirui New materials not only provides solutions for steel rust removal for engineering projects and manufacturers, but also is committed to helping users understand how to prevent rust. Here are some effective rust prevention measures:

Regular inspection and maintenance: regular inspection of the surface of the steel bar, timely detection and treatment of rust problems.

Environmental control: Use moisture-proof materials in humid environments to avoid the impact of steel bars in contact with water and long-term exposure to the air.

Coating protection: Coating primer or anti-rust agent on the surface of the steel bar, forming a layer of corrosion resistant protective film on the surface, this layer of protective film can effectively isolate the moisture and oxygen in the air, so as to prevent steel and steel bars from contacting these elements that cause rust again.

P.S. The above is the relevant introduction of the "steel rust removal agent and rust prevention skills", if you want to further understand, you can contact the official website customer service online, or call the national free service hotline: 177 2235 6896 (synchronous wechat).